Tutorials
How to Draw an Arc with GCode
Gcode syntax
G02 will draw an arc clockwise in the XY plane.
G02 (X[value]) (Y[value]) (I[value]) (J[value]) (F[value]);
G03 will draw an arc counterclockwise in the XY plane.
G03 (X[value]) (Y[value]) (I[value]) (J[value]) (F[value]);
Optional parts (are in parenthesies). [value] should be replaced by a decimal number with optional exponent.
Gcode details
Arcs begin at the current tool position and end at (X,Y).
The circle of the arc has a center at (I,J).
F indicates the feed rate, the speed to draw the line.
If X or I are not included in the GCode command, the tool position X is used.
If Y or J are not included in the GCode command, the tool position Y is used.
