Makelangelo 7.6.5 software update
Get the files
[products skus=’FIRM-0001, SOFT-0001′]
Added converter Multipass. You can adjust the angle and the number of passes.
Added converter Wander. You choose the number of lines, but not where they randomly travel.
Added belt and servo wire length calculation to settings > machine panel. This will make it easier to order large-scale machines from Marginally Clever.
Added generator Limit Test. The gcode will travel around the outside edge of the paper and then return to home. This is very useful if you are running from an SD card.
Added visual of control box and stepper wires:
Improved Boxxy style (added infill):
Simplified connect list & rescan to connect/disconnect button:
Also
- Added ANSI, US, and Arch paper sizes
- Improved DXF multilayer support, improved change tool message
- Force log to bottom of file unless caret moved; shortened gui log for faster updates
- Several bugfixes
Home position and calibration
Please print this calibration PDF, unscaled, on letter or A4 paper. Place it at the top center of your machine. the pen holder then lines up with the picture on the paper to get perfect calibration every time. This works extra good when you already have paper on the machine and you want to restart or continue a drawing using the “start at” feature.
firmware update
Please download and update to the latest firmware.