[user79]

waiting for your answer

[user79]

So i bought your “makeangelo5″ for 480cad, so its brand new and should work out from the box like anything wish is already mount and the result is that it can’t even draw a basic square .
All the solutions that you provided are about cheating with length values and even if i tryed everything losing days of work for that, i followed every steps and nothing worked at the end.
I have lost enough weeks with this thing, i have much better to do than waiting for not coming answers on a forum.

So now im dealing with a machine that does nothing and is not working when at the same time the money that i sent you was working because as i could see it was taken from my bank account.

So now im gonna sent you back your ” brand new not working michael angelo 5 ” and there will be two solutions:
– first you refund my account and everything is fair.
– second you succeed to make it work and send it back to me working fine.

kind regards David

[user79]

any idea ?

[user79]

so i record L and R values with D8 which are both 1025.00
then home then draw rectangle
then changed to different values like 990 900 1000 1005 1010 1020 1030 …
and this only affected the height of the home position, the deformation is still there

[user79]

so i tried to find out and understood i had to update the makelangelo firmware, so i followed each steps and when compiling it i got this results:

and now i don’t know what to do ( again ) would be nice if i could make it work before 2021 .. 🙂

and merry christmas ..

[user79]

I don t understand i bought the makelangelo5 for 480cad ready to use, plugged it and its not working at all. firmware and settings should be the good ones and working fine so why am i facing this issue ?

[user79]

so i sent the D11 command like explain in the step 9 of updating firmware.
then i did the D7 command and changed belt length from 1025.00 to 1000.00
then i checked in lcd screen the settings to see if it has changed, and i could verify that
the belt length was modified to 1000.00
So i did again the draw A2 A3 A4 draw sqaure command to see if those belt change would be better, and unfortunnately it was still same deformed result with no difference ..
so i did again D7 to comeback to 1025.00 length .

[user79]

sorry but all this is quite new for me so now i have other questions:

-first do i have to install new firmware like this one in the machine ? :
https://github.com/MarginallyClever/Makelangelo-firmware/releases/tag/9.2.0
-then you speak about D11 or M502 commands, but how to use those commands ?, is it something i must change in the firmware text code or somewhere else in a software or command invit ?

if you could clarify the steps, im totally new to the process 🙂

[user79]

hey Dan thanks for your reply, so here are the pictures of the motors,

how do you modify or verify the belt length in the machine ?

[Author]

Posts