patriciamarques81
Forum Replies Created
-
Posts
-
For size A1 the distance between motors is 63 cm and from these to the home point of the pen is 92 cm, although from the right motor to the point of the pen they are 27 cm. it’s a matter of experimenting.
I managed to solve by playing with the distance between motors and the calibration point of the pen. I moved one of the motors, at the home point of the pen and after several attempts I managed to print perfect.
Hello!
I’m having the same problems as user79, it doesn’t make a perfect square, I sent D8 in the Makelangelo software box some values appear for D8, but I don’t understand where I’m going to adjust the values for D7. I have already tried several distances between the engines and from them to the home point and always deconfigure.
To print in A1 size, what are the measurements between motors and from these to the home point of the pen?Hi! I have a basic polargraph and I was only able to print right on an A4 sheet.
I tried to print on an A1 sheet, with different measurements between the motors and the distance between the pen, but it always comes out deformed.
I needed to print in A1 size for a project, what should I do?https://photos.google.com/photo/AF1QipPIBxul2qn1wIUk_MR642VW36E9wcS2swSDufb8
https://photos.google.com/photo/AF1QipO0qKeQ-lF1u5EMg5VbHBsOaaQzYQ5IVt1c3y0l
