Software Tutorial

[Anonymous]

Hi guys,

Might be a dumb question but how to I change the detail levels of the in-software renderings? When I select an image the conversion options box pops up and if I choose, for example, cross-hatching I get something that looks like this: https://gyazo.com/9ba0f59ba79a89dbe882dbcb2822e3dd with no option to change it to make it look more like this:https://gyazo.com/f753d71f6b1ea3bdafb28a8dd9f4a6b1

The question stands for all the conversion options. I can’t get anything to look like things I’ve seen Dan post here.

[Dan]

How big is the paper on which you are converting?

How big is the pen tip?

These are the two major factors.

[Anonymous]

A4, but it seems to thing paper is much larger than it is. Printing on A5 fills up an A4 width wise even though they’re both portrait.

The pen tip is 1.0mm.

[Anonymous]

think*

[Anonymous]

I also just noticed that I’m getting large shifts of about 10 to 30mm half way through a drawing. Everything with shift upwards as if I’d held on to the goldola (I haven’t).

[Author]

Posts