Software settings issue

Shop › Forum › Makelangelo Polargraph Art Robot › Software settings issue

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2017-05-14 at 04:33 #13088
    Anonymous
    Inactive

    Hi! Makelangelo is great, thanks for sharing it. But I have a huge problem with saving settings for pen in latest version of software. Just “Pen” settings not saving, but I cant set servo to work in right angles and set speed. Without this settings I can not use Makelangelo. My OS is Windows 8.1 if it means. Can anybody help me with this problem?

    2017-05-14 at 08:41 #13090
    Dan
    Keymaster

    Please describe the steps more clearly. I will try to copy your moves and see if the problem happens here. if it does happen here then I can work on a fix for everyone.

    2017-05-14 at 09:57 #13091
    Anonymous
    Inactive

    I just go to the Settings menu, set up Machine tab with my machine`s parameters, then set up paper size and on Pen tab change Up and Down settings for servo. Then I press ok and all settings saved and applied, but not settings from Pen tab. They stays by default no matter that I do.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.