Rumba Board Servo Connection

Shop › Forum › Makelangelo Polargraph Art Robot › Rumba Board Servo Connection

Tagged: , ,

  • This topic has 2 replies, 2 voices, and was last updated 8 years ago by Dan.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2017-03-27 at 18:31 #12745
    Anonymous
    Inactive

    Dan I need help with the image and how the connection of the servo goes. Images seem to be gone

    2017-03-28 at 21:03 #12757
    Anonymous
    Inactive

    Dan please confirm this is the correct connection for the servo on the rumba. By default you have PIN 5 for it
    https://goo.gl/images/zVh3c9

    Or do you set up it differently?

    Also is there a reason you would know why a servo would stop working completely?

    2017-04-20 at 17:03 #12897
    Dan
    Keymaster

    The picture at the link is correct. Notice that the 5v and GND wires switch order.

    There are many reasons a servo could die – wear, hitting something and breaking internally, incorrect voltage… none of these things should be a problem for a new servo from us.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.