Makelangelo Graphic LCD

Shop › Forum › Makelangelo Polargraph Art Robot › Makelangelo Graphic LCD

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • 2016-02-06 at 18:00 #8897
    Anonymous
    Inactive

    Just for fun, I decided to hook up a RepRap 128×64 graphic LCD. Here is what I have so far.

    https://www.youtube.com/watch?v=5-vOb9i8O9I

    Its a work in progress, but I think its pretty cool. Now if I could just figure out why I’m losing step ?

    Regards,

    William

    2016-02-06 at 20:22 #8898
    Anonymous
    Inactive

    [url=https://flic.kr/p/DTgJwg][img]https://farm2.staticflickr.com/1673/24865411435_2b8f36e8d2_z.jpg[/img][/url][url=https://flic.kr/p/DTgJwg]Lcd[/url] by [url=https://www.flickr.com/photos/leehemmingsen/]Willam Hemmingsen[/url], on Flickr

    2016-02-06 at 20:22 #8899
    Anonymous
    Inactive

    Lcd

    2016-02-07 at 12:06 #8900
    Anonymous
    Inactive

    https://www.youtube.com/watch?v=5gOfk-ve2OU

    2016-10-26 at 14:45 #11385
    Anonymous
    Inactive

    Woah William!!

    Could you please share your firmware? Is the SD card working for you?

    Very impressive.

    Noah

    2017-07-10 at 21:16 #13462
    Anonymous
    Inactive

    Hello, I have tired making the Makelanglo 5 using the Rumba board and LCD display.. but i cant seem to get the LCD to display anything.. it turns on and i can see the knob interacting witht he board but otherwise i cant see what i am selecting.. any thoughts buddy..

    I used the Rumba Firmware on this site.

    2017-07-10 at 23:19 #13463
    Dan
    Keymaster

    @fishingcairns – you have the graphicLCD version from earlier in this thread? We didn’t write that version and haven’t seen the code. Official support does not exist yet.

    2017-07-22 at 20:27 #13585
    Anonymous
    Inactive

    How are you able to make suck high quality drawing? I am using and UNO and Adafruit driver and can’t even come close to this. I can’t even come close to this on the screen with the latest software from this site. Please let me know how I can make these improvements and how I can add the large reprap display to mine. I assume I will need to use a mega and compatible driver to add the connectors for the LCD.
    Curt

    2017-07-23 at 11:12 #13588
    Dan
    Keymaster

    @curt locey which high quality drawing are you talking about? The LCD panel is a project some DIY people are working on.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.