Delta Robot v3

Tagged: delta robot, delta robot v3

This topic has 3 replies, 2 voices, and was last updated 4 years, 7 months ago by Dmitry Revunov.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
2017-11-03 at 11:14 #14547

Dan
Keymaster

This thread is to discuss everything about the Delta Robot v3

https://www.marginallyclever.com/product/delta-robot-v3/

https://github.com/MarginallyClever/Delta-Robot-v3-firmware

https://www.marginallyclever.com/other/samples/fk-ik-test.html

2020-05-07 at 08:44 #28006

Dmitry Revunov
Participant

I really liked your Delta Robot v3, it’s really cool.
Together with the code for the robot, I found the file “test_pattern-2.txt”, in which there is a G-code.
What Windows program can I use to transfer G-code from test_pattern-2.txt files to Delta Robot v3?

2020-05-07 at 08:45 #28008

Dan
Keymaster

I haven’t done any work on delta robot in a long time.

It’s possible the delta robot still runs on Makelangelo-firmware, which supports SD card reading. So you could put the file on the SD card, start the robot, and use the LCD to read the file.

2020-05-07 at 09:46 #28011

Dmitry Revunov
Participant

Thank!
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.