7.3.4 – buttons greyed out in W7

Shop › Forum › Makelangelo Polargraph Art Robot › 7.3.4 – buttons greyed out in W7

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2016-05-05 at 12:43 #9605
    Anonymous
    Inactive

    Hello

    I’m attempting to out together a Makelangelo type machine and the steppers are working fine in v5 of the SW.

    However, I thought it only fair to make a small donation and so downloaded v7.3.4 the other day. Unfortunately, while the motors still work, I do not seem to be able to set “home” and so neither the “go home” nor any of the start buttons will become operative.

    Am I missing anything obvious here?

    When I hit “set home” I see the command “G92 X0 Y0” but the buttons stay grey.

    Many thanks for your thoughts.

    Ugi

    2016-05-05 at 12:45 #9607
    Anonymous
    Inactive

    PS – I have tried on two separate W7 machines and they perform the same way. I don’t have access to any other OS to try.

    Ugi

    2016-05-05 at 13:11 #9610
    Dan
    Keymaster

    The latest is 7.4.5, released last friday. https://github.com/MarginallyClever/Makelangelo/releases/tag/7.4.5
    Please update and tell me if the problem persists.

    2016-05-05 at 13:18 #9613
    Anonymous
    Inactive

    That’s got it – buttons now appear to behave as expected. Many thanks.

    Oddly, I still get the issue where only one motor will hold at a time. If I move horizontally (using manual buttons) the right motor slips and if I move vertically the left motor slips.

    Cheers

    Ugi

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.